CNR-FBO-060203

Bioclimatic Gutter Strip

Roll Length50 MT
Contact

Description

Geometric Design and Cross-Section Analysis:

  • Locking Tab (Root) Width: 6 mm (Locks precisely into the upper mounting channels of bioclimatic front drainage gutter profiles and bearing beam tab beds).

  • Total Profile Width / Blade Length: 79 mm (Features extra horizontal length to completely seal the massive insulation and working gaps remaining between the gutter basin and moving louvers in wide-span bioclimatic systems).

  • Channel and Geometry Structure: The product features an H-type dual-tab mounting root of 6 mm at the left end that provides mechanical locking to the profile, and extending from this root to the right in a completely straight (180-degree) line is an extra-wide flexible wiper blade (flag) geometry of 79 mm. Its horizontal flat structure is designed with rigidity that resists waviness on wide surfaces.

Functional Role in the System:

  • Maximum Gutter Sealing and Water Deflection: Covers the front water collection channel of bioclimatic roof panels like a roof from above. Prevents water discharged from louvers from being scattered by wind and vortex currents; with its 79 mm wide surface, discharges water directly and without loss to the center of the gutter.

  • Air and Leaf Barrier (Extended Coverage Line): Thanks to superior vertical and horizontal sealing line, it cuts off strong air currents that could seep into gutter basin gaps during severe storms. Provides environmental protection by absolutely preventing leaves, branches, dirt, and pollen from falling into the gutter basin and clogging drainage holes.

  • Acoustic Dampening and Whistling Prevention: When moving bioclimatic panels close, it stops air circulation and turbulence that forms in profile cavities. Completely dampens whistling, humming, and resonance noise that wind can produce in wide sections through its aerodynamic structure.

Target Sector and Application Area:
Manufacturers of large-scale and wide-span motorized bioclimatic aluminum roof systems, rolling roof producers, retractable winter garden installation companies, and architectural aluminum joinery factories.

Raw Material and Tolerance Specifications:

  • PVC and TPE Extrusion: The 6 mm upper locking root passing into the gutter channel has optimum hardness to prevent release from the slot under the moment and wind load that the 79 mm massive blade will apply. The 79 mm extra-wide flat blade section, which is continuously exposed to water contact, wind, and panel friction, is manufactured with co-extrusion (Co-ex) technology featuring high elastic memory that prevents sagging and creasing.

Climatic and Thermal Stability (Temperature Values):

  • CNR Seal- PVC Series: Operates within standard seasonal temperatures between -20°C and +60°C. Offers a highly economical and long-lasting gutter solution for standard large bioclimatic projects requiring extensive insulation areas.

  • CNR Seal- TPE Series: Demonstrates superior thermal stability in the most extreme climate conditions between -40°C and +80°C. Does not melt, crack, sag, or loosen when exposed to direct sunlight or water accumulation inside the gutter; retains flexibility without hardening under freezing snow load and frost conditions in winter.

Packaging and Production Footage:

  • Standard Wrapping: The standard packaging/wrapping quantity established by our factory for this extra-wide bioclimatic gutter protection and insulation model is 50 meters.

  • Flexible Solution: To prevent material waste for manufacturers and installation teams on wide-span facade lengths, custom footage wrapping on reels or bobbins is performed according to customer requirements and profile dimensions.

Customer-Specific (Contract) Flexibility:

  • Various color options that achieve perfect match with aluminum gutter profiles and concept colors (Anthracite Grey, Black, White, Cream, etc.) to create visual unity.

  • Custom length cutting capability tailored to your project, eliminating cutting work at the installation site.

Similar Products

Bioclimatic Rail Sealing Strip
CNR-FBR-060101
50 MT

Bioclimatic Rail Sealing Strip

Geometric Design and Cross-Section Analysis:Interlocking Tab (Root) Width: 6 mm (Locks precisely into the side tab seats of bioclimatic aluminum carrier rails and main beam profiles).Total Profile Height / Blade Length: 34 mm (Sufficient length to seal the dynamic working clearance between the rotating aluminum panels and the rail body without gaps).Channel and Geometry Structure: The product features an H-type double-tab mechanical locking root of 6 mm at the bottom for profile attachment, an inverted L-type pressure flange (pressure bridge) on the left side of this root that wraps around the profile externally and supports sealing, and a 34 mm flexible asymmetric wiping blade (flag) geometry extending upward with an elegant curve. This curved special form provides perfect adaptation to the axial rotational movement of the panels.Functional Role in the System:Mechanism Protection and Dust Barrier: Isolates the motorized mechanical assemblies, pivot shafts, and traveling carriage groups that enable the bioclimatic ceiling panels to rotate on their own axis from the external environment. Prevents dust, leaves, pollen, and dirt from entering the rail, thereby preventing mechanism clogging and wear.Wind and Sound Isolation (Noise Reducer): Flexes during the rotational movement of the panels according to opening, closing, and ventilation degrees, blocking wind passage along the vertical line. With its acoustic structure, it definitively eliminates whistling and howling noises that may arise from large profile gaps in strong winds.Curved Sweeping and Superior Sealing: The 34 mm curved flexible blade structure maintains continuous and gentle contact with the side surfaces of the rotating aluminum panels. This directs water spray that may come from the side edges during panel movement or in closed position toward the discharge channel and creates a flawless sealing line.Target Sector and Application Area:Manufacturers of motorized and moving bioclimatic aluminum roof systems, rolling roof producers, installation companies for opening-closing winter gardens, and architectural aluminum joinery factories.Raw Material and Tolerance Identity:PVC and TPE Extrusion: The upper locking root of 6 mm and L flange passing into the rail channel feature optimal hardness to prevent dislodgement from the groove under movement jolts and panel pressure. The 34 mm asymmetric curved blade section, which is continuously subjected to friction, rotational pressure, and flexing, is manufactured with co-extrusion (Co-ex) technology that provides high abrasion resistance and "memory" stability, enabling the blade to quickly return to its original form when panel pressure is released.Climatic and Thermal Stability (Temperature Values):CNR Seal - PVC Series: Operates in standard seasonal temperatures between -20°C and +60°C. A highly economical and long-lasting rail sealing solution for standard bioclimatic and shading projects.CNR Seal - TPE Series: Demonstrates superior thermal stability in the most extreme climate conditions between -40°C and +80°C. It neither melts, sags, loosens, nor sticks inside heavy aluminum rails that become extremely hot under direct summer sun rays; in winter's freezing snow loads and frost conditions, it does not harden, thus avoiding compression of the panel rotation mechanism.Packaging and Production Length:Standard Wrapping: The standard packaging/wrapping quantity established by our factory for this bioclimatic rail protection and sweeping model is 50 meters.Flexible Solution: To prevent waste during installation by manufacturers and assembly teams, custom lengths are supplied on spools or bobbins according to customer requirements and profile dimensions.Customer-Specific (Custom) Flexibilities:Different color options that provide visual unity by perfectly matching the color of aluminum bioclimatic profiles and concepts (Anthracite Gray, Black, White, Cream, etc.).Custom length cutting capability for your project, eliminating cutting work on the installation site.

View Details
Bioclimatic Gutter Wick
CNR-FBO-060201
75 MT

Bioclimatic Gutter Wick

Geometric Design and Cross-Section Analysis:Engagement Claw (Root) Width: 8 mm (Locks precisely to the side claw seats of heavy-duty bioclimatic pre-drainage gutter profiles and load-bearing beam junction channels).Total Profile Height / Blade Length: 42.5 mm (Features sufficient length to flawlessly seal the isolation gap between the wide-section gutter edge and the endpoints of rotating movable aluminum panels on their own axis).Channel and Geometric Structure: The product comprises an H-type 8 mm wide double-claw mounting root at the top that provides mechanical locking to the profile, directly below which sits an angled double flange (pressure bridge) structure that creates stabilization support and sealing pressure to the profile, and extends downward at a specific angle into a 42.5 mm flexible asymmetric wiper blade (flag) geometry.Functional Role in the System:Gutter Insulation and Drainage Control: Prevents water flowing from bioclimatic ceiling panels from being blown inward by wind through the water collection gutter (creek) junction section at the front. Directs water to flow directly into the gutter basin without turbulence.Angled Sweeping and Continuous Sealing: The 42.5 mm angled flexible blade structure maintains continuous light contact with the end and side surfaces of bioclimatic panels undergoing axial movement. Creates a complete sealing line when panels close, while sweeping water spray outward during opening.Air, Leaf and Whistle Barrier: Through superior vertical insulation, blocks air currents that could seep into the gutter cavity during strong winds. Prevents leaves, twigs, dirt and pollen from falling into the gutter basin and clogging drainage holes; completely eliminates whistling noise originating from profile gaps.Target Sector and Application Field:Motorized and movable bioclimatic aluminum ceiling system manufacturers, rolling roof producers, opening-closing winter garden installation companies and architectural aluminum joinery factories.Raw Material and Tolerance Specification:PVC and TPE Extrusion: The 8 mm thick locking root passing through the gutter channel and double flange structure feature optimal hardness to resist dislodgment from its seat during movement shock and panel pressure. The 42.5 mm asymmetric angled blade section, continuously exposed to air flow, water contact and friction movement of panels, is manufactured using high-wear-resistant co-extrusion (Co-ex) technology with excellent "memory" stability that prevents sagging over time.Climatic and Thermal Stability (Heat Values):CNR Seal- PVC Series: Operates within standard seasonal temperatures between -20°C and +60°C. Provides a highly economical and long-lasting gutter solution for standard bioclimatic projects requiring water and air sealing.CNR Seal- TPE Series: Demonstrates superior thermal stability under extreme climate conditions between -40°C and +80°C. Does not melt, crack, sag or stick in gutters exposed to direct sunlight, UV radiation and water accumulation; does not harden in freezing snow loads during winter, ensuring smooth mechanism operation.Packaging and Production Length:Standard Packaging: The standard packaging/wrapping quantity established by our factory for this bioclimatic gutter insulation and sweeping model is 75 meters.Flexible Solution: To prevent waste during application by manufacturers and installation teams, custom winding on reels or bobbins is performed in desired lengths according to customer requirements and profile dimensions.Custom (Job-Order) Flexibilities:Various color options providing perfect visual harmony with the aluminum gutter profiles and design concept (Anthracite Gray RAL 7016, Black, White, Cream, etc.).Custom length cutting capability eliminating cutting work at the installation site.

View Details
Bioclimatic Gutter Wick
CNR-FBO-060202
50 MT

Bioclimatic Gutter Wick

Geometric Design and Cross-Section Analysis:Mounting Hook (Root) Width: 7 mm (Locks precisely into the side hook seats of wide-section bioclimatic front drainage gutter profiles).Total Profile Height / Blade Length: 70 mm (Features extra length to seamlessly seal the maximum insulation distance between deep gutter basins and bioclimatic panel joints with high movement clearance).Channel and Geometry Structure: The product features an H-type 7 mm double-hook mounting root at the upper section that provides mechanical locking to the profile, immediately below which is a horizontal double-flange (pressure bridge) structure that provides stabilization support to the profile, and a 70 mm extra-long flexible asymmetric wiper blade (flag) geometry angling downward with a slight inclination. The micro-hook structure at the blade tip supports more stable water flow across the surface.Functional Role in the System:Deep Gutter Insulation and Maximum Water Discharge: Used in front water collection gutters of bioclimatic roof systems with extra depth. Prevents intensive water flowing from lamellas from being blown back into the interior space by wind and vortex effects; discharges water directly into the gutter with its 70 mm wide angle.Maximum Air and Debris Barrier: Thanks to its 70 mm massive insulation curtain, it cuts strong air currents that could seep into gutter basin cavities during severe storms. Definitively prevents leaves, branches, dirt, and pollen from the external environment from clogging deep gutter channels and causing water overflow.Acoustic Dampening and Whistle Eliminator: Stops air circulation that forms in deep profile cavities when movable panels close. Its aerodynamic long structure completely absorbs whistling, rumbling, and vibration noise that wind can create in wide sections.Target Sector and Application Area:Manufacturers of large-span heavy-duty motorized bioclimatic aluminum roof systems, rolling roof producers, wide winter garden installation companies, and architectural aluminum joinery factories.Raw Material and Tolerance Identity:PVC and TPE Extrusion: The upper locking root measuring 7 mm that passes into the gutter channel is optimally hardened to prevent dislodging from its seat under the bending moment load created by the 70 mm long blade. The 70 mm extra-long asymmetric blade section, which is exposed to continuous water contact, wind pressure, and panel friction, is manufactured using co-extrusion (Co-ex) technology with high flexibility memory that does not sag, undulate, or crack.Climatic and Thermal Stability (Heat Values):CNR Seal - PVC Series: Operates within standard seasonal temperatures between -20°C and +60°C. Provides a highly economical and long-lasting gutter solution for standard large bioclimatic projects requiring extensive insulation areas.CNR Seal - TPE Series: Demonstrates superior thermal stability under the most extreme climate conditions between -40°C and +80°C. Does not melt, crack, sag, or dry out when exposed to direct sunlight and water accumulation within the gutter; does not stiffen under freezing snow load in winter, protecting the panel operation mechanism.Packaging and Production Length:Standard Packaging: For this large-size bioclimatic gutter protection and insulation model, the standard packaging/wrapping quantity established by our factory is 50 meters.Flexible Solution: To prevent material waste for manufacturers and installation teams on wide façade widths, custom length spooling or coil wrapping is performed according to customer requirements and profile dimensions.Customer-Specific (Custom) Flexibilities:Various color options that achieve perfect visual harmony by matching the color of aluminum gutter profiles and the design concept (Anthracite Grey, Black, White, Cream, etc.).Project-specific length cutting capability that eliminates cutting labor at the installation site.

View Details
Bioclimatic Panel Sealing Gasket
CNR-FBP-060301
100 MT

Bioclimatic Panel Sealing Gasket

Geometric Design and Cross-Section Analysis:Interlocking Clip (Root) Width: 7.2 mm (Locks precisely and tightly into the internal locking grooves of self-rotating aluminum panel ceiling lamellae, engineered to exact dimensions).Total Cross-Section Height and Reservoir Dimensions: 14.30 mm total height / 11.2 mm blade height (Features optimum geometric depth to fill micro-gaps in panel joints and create a water drainage reservoir).Channel and Geometric Structure: The product features an H-type 7.2 mm red-colored mounting root at the bottom providing independent locking and colored visual tracking, and a W-type (or asymmetric fork) sealing reservoir with dual-stage angled protective walls at the top. This clip-based, multi-chambered geometric design provides maximum closure under pressure.Functional Role in System:Maximum Panel Interlocking and Sealing: Operates along the horizontal overlap line where two panels compress together when the motorized aluminum lamellae of the bioclimatic roof system close. Thanks to the dual-stage channel structure, water droplets that might seep when panels close are trapped in its reservoir, directed toward drainage, and provide complete waterproofing.Acoustic Damping and Impact Barrier: Prevents metallic noise and wear caused by heavy aluminum lamellae striking each other during motor-driven closing movements. Absorbs micro-vibrations of ceiling panels in strong winds, eliminating rumbling and whistling sounds.Air and Dust Barrier: Creates an impenetrable insulation barrier between the interior and exterior environment when the roof is fully closed. Blocks air currents, dust, pollen, and dirt that may seep through lamella joints during severe storms.Target Sector and Application Area:Motorized and axially moving bioclimatic aluminum roof system manufacturers, Rolling roof producers, premium segment opening-closing conservatory installation firms, and architectural aluminum joinery factories.Raw Material and Tolerance Identity:Co-Extrusion Technology: The 7.2 mm lower locking root fitted into the aluminum panel channel is manufactured with rigid (indicated in red color) PVC/TPE formulation to prevent ejection from the groove during assembly and operational vibrations. The 14.30 mm upper W-type reservoir and blade body, which endure continuous panel pressure, crushing, and friction from opening-closing cycles, is manufactured with black flexible co-extrusion compound offering superior elastic memory and wear resistance.Climatic and Thermal Stability (Temperature Ratings):CNR Seal - PVC Series: Operates within standard seasonal temperatures from -20°C to +60°C. An economical and durable roof solution for standard rolling roof and bioclimatic projects requiring inter-panel insulation.CNR Seal - TPE Series: Demonstrates superior thermal stability in extreme climate conditions from -40°C to +80°C. In summer, when lamella profiles face direct solar radiation at steep angles and heat up like furnaces from greenhouse effect, it resists melting, sticking, drying, or loosening; in winter, it maintains elasticity against freezing snow loads and frost, preventing mechanism jamming or cracking.Packaging and Production Meterage:Standard Packaging: The standard packaging/wrapping quantity established by our factory for this functional bioclimatic inter-panel locking model is 100 meters.Flexible Solution: To prevent material waste based on lamella widths, custom metering on spools or bobbins is performed according to customer request and profile specifications.Custom (Special Order) Flexibilities:Different upper body color options providing visual harmony with the color of aluminum lamella profiles and concept (Anthracite Gray RAL 7016, Black, White, Cream, etc.) (Mounting root remains red for installation tracking while body color can be changed).Custom length cutting capability for your project, eliminating on-site cutting labor.

View Details
Bioclimatic Panel Seal
CNR-FBP-060302
100 MT

Bioclimatic Panel Seal

Geometric Design and Cross-Section Analysis:Pass-Through Locking Nail (Root) Width: Features a rigid H-type red locking root that sits with full tolerance in the internal locking slots of standard bioclimatic panel ceiling lamellae.Geometric Structure: The product has a red-colored mounting root at the bottom that provides independent locking and ease of installation, while at the top it features double isolation wings rising perpendicularly to the sides and a flexible upward-facing dome (crescent moon) geometry that bridges the center of these wings. This double-layered and chambered structure offers maximum damping and closure stability under vertical pressure.Functional Role in the System:Double-Line Sealing Between Panels: Functions along the horizontal line where two panels interlock when the movable aluminum lamellae forming the bioclimatic ceiling system reach closed position. The flexible dome structure in the center and the rigid lateral wings create a two-stage barrier when panels close, definitively preventing any water droplets from leaking through.Acoustic Damping and Impact Barrier: Completely prevents metallic noise and wear caused by heavy aluminum lamellae striking one another during axial closing movement. The circular flexible bridge in the center absorbs micro-vibrations of the ceiling panels like a shock absorber, completely eliminating rumbling and whistling sounds.Air and Dust Barrier: Creates an impenetrable isolation bridge between interior and exterior environments when the ceiling is fully closed. During severe storms, it keeps air currents, dust, pollen, and dirt that could seep in from lamel joints out of the interior space.Target Sector and Application Area:Manufacturers of motorized and axially-moving bioclimatic aluminum ceiling systems, rolling roof producers, high-end opening-closing winter garden installation firms, and architectural aluminum joinery factories.Raw Material and Tolerance Identity:Co-Extrusion Technology: The lower locking root (shown in red) pressed into the aluminum panel channel is manufactured with a rigid PVC/TPE formula to prevent ejection from the slot during assembly and operational vibrations. The upper double-winged dome body section, which is subjected to continuous panel pressure, compression, and opening-closing friction, is manufactured with a flexible co-extrusion compound in black color possessing high elasticity memory and wear resistance.Climatic and Thermal Stability (Temperature Values):CNR Seal - PVC Series: Operates at standard seasonal temperatures between -20°C and +60°C. A highly economical and long-lasting ceiling solution for standard rolling roof and bioclimatic projects requiring inter-panel insulation.CNR Seal - TPE Series: Demonstrates superior thermal stability under the most extreme climate conditions between -40°C and +80°C. It does not melt, stick, dry out, or loosen between lamel profiles that face direct summer sunlight at vertical angles and become heated like ovens due to greenhouse effect; in winter it retains elasticity during freezing snow loads and frost events, preventing mechanism jamming or breakage.Packaging and Production Footage:Standard Packaging: The standard packaging/wrapping quantity established by our factory for this functional bioclimatic panel inter-locking double-action model is 100 meters.Flexible Solution: To prevent material waste by manufacturers and installation teams according to lamel widths, custom footage wrapping on reels or spools is performed according to customer request and profile dimensions.Customer-Specific (Custom) Flexibilities:Different upper body color options that ensure complete visual unity by matching the color of aluminum lamel profiles and design concept (Anthracite Grey, Black, White, Cream, etc.) (The mounting root remains red for installation tracking while body color can be changed).Custom length cutting capability for your project, eliminating on-site cutting labor.

View Details
Bioclimatic Panel Seal
CNR-FBP-060303
100 MT

Bioclimatic Panel Seal

Geometric Design and Cross-Section Analysis:Interlocking Claw (Root) Structure: Features a mechanically interlocking mounting root with high elasticity allowance, wide square-cell cavities, and double-claw design that locks into the internal locking grooves of bioclimatic lamel profiles.Channel and Geometry Structure: The product features a hollow (cellular) mounting root at the bottom that sits flush in the profile channel and increases strength, and flexible symmetrical double-wing isolation fins rising to the left and right at the top. The micro-serrated (tooth) geometry located at the base of the inner reservoir where the fins meet breaks water surface tension, enhancing flow stability and providing superior sealing strength.Functional Role in the System:Double-Wing Inter-Panel Sealing and Pooling: Operates along the horizontal line where two panels are engaged when the moving aluminum lamels of the bioclimatic ceiling system are in closed position. The flexible fins opening to the left and right create a two-stage sealing curtain when panels close, while the serrated inner reservoir structure traps escapable water particles within itself and directs them to drainage.Acoustic Damping and Shock Absorber Function: Completely prevents noise from metal-to-metal contact during the axial closing movement of heavy aluminum lamels. The wide cellular (hollow) structure at the base acts like an air cushion to dampen the impact load created when panels close and absorbs micro-vibrations from wind, completely eliminating whistling noise.Air and Dust Barrier: Creates an impenetrable insulation line to maintain indoor comfort when the ceiling is fully closed. During severe storms, it keeps air currents, dust, pollen, and dirt that could seep into interior spaces from lamel joint locations outside.Target Sector and Application Area:Manufacturers of motorized and axially-moving bioclimatic aluminum ceiling systems, rolling roof producers, premium segment retractable-closable winter garden assembly companies, and architectural aluminum joinery factories.Raw Material and Tolerance Identity:Co-Extrusion Technology: The cellular lower locking root passing through the aluminum panel channel has optimal hardness so it does not pop out of the groove during panel movements and sudden wind vacuums. The upper double-angled serrated reservoir body, which is continuously subjected to panel pressure, crushing, and opening-closing friction, is manufactured with flexible co-extrusion (Co-ex) technology featuring high elasticity memory and wear resistance.Climate and Thermal Stability (Temperature Values):CNR Seal - PVC Series: Operates within standard seasonal temperatures between -20°C and +60°C. A highly economical and long-lasting ceiling solution for standard rolling roof and bioclimatic projects requiring inter-panel insulation.CNR Seal - TPE Series: Demonstrates superior thermal stability in the most extreme climate conditions between -40°C and +80°C. Does not melt, stick, or sag between lamel profiles that face direct summer sunlight at vertical angles; in winter, maintains the elasticity of its cellular structure under freezing snow loads, preventing mechanism jamming.Packaging and Production Footage:Standard Wrapping: The standard packaging/wrapping quantity established by our factory for this functional bioclimatic inter-panel cellular and serrated model is 100 meters.Flexible Solution: To prevent waste by manufacturers and assembly teams according to lamel widths, rolling or coil wrapping is performed at custom footage according to customer requirements and profile dimensions.Customer-Specific (Contract Manufacturing) Flexibilities:Various color options that achieve complete alignment with the color of aluminum lamel profiles and concept (Anthracite Grey, Black, White, Cream, etc.) to create visual unity.Custom length-cutting capability tailored to your project, eliminating cutting work at the assembly site.

View Details
Bioclimatic Panel Gasket
CNR-FBP-060304
100 MT

Bioclimatic Panel Gasket

Geometric Design and Cross-Section Analysis:Interlocking Lug (Root) Width: 7.5 mm (Locks with full-size, high-strength fit into the internal lock slots of rotating mobile aluminum panel lamellae on their own axis).Total Profile Height: 16 mm (Features optimum damping depth to faultlessly close the vertical closing distance and working clearance at panel joints).Channel and Geometric Structure: The product features a dual-lug H-type 7.5 mm mounting root (indicated in red) at the bottom that provides mechanical locking and installation ease to the profile, and at the top a fully hollow flexible, perfectly circular smooth balloon (D-type) geometry. It delivers maximum closure and flex capability under pressure.Functional Role in the System:Maximum Compression Between Panels and Sealing: Functions along the horizontal line where the two panels interlock when the moving aluminum lamellae forming the bioclimatic ceiling system reach the closed position. The 16 mm flexible circular balloon structure creates complete cushioning when panels close, definitively preventing any water droplet seepage and moisture passage.Air Cushion Effect and Acoustic Damping: Prevents metallic noise and wear caused by heavy aluminum lamellae impacting each other during axial closing movement by softening them like an air cushion. Dampens micro-vibrations that ceiling panels may undergo in strong winds, completely eliminating whistling and rumbling sounds.Air and Dust Barrier: Creates a complete insulation barrier to preserve indoor comfort when the ceiling is fully closed. Keeps air flow, dust, pollen, and dirt out during severe storms that could otherwise seep in through lamel joint areas.Target Sector and Application Area:Manufacturers of motorized and axially moving bioclimatic aluminum ceiling systems, rolling roof producers, high-end retractable-closing winter garden installation companies, and architectural aluminum carpentry factories.Raw Material and Tolerance Identity:Co-Ex Extrusion Technology: The 7.5 mm lower locking root pressed into the aluminum panel channel is manufactured with rigid (indicated in red) PVC/TPE formula to prevent it from slipping out of the slot during panel movements and vibrations. The 16 mm upper balloon body, which is subject to continuous panel pressure, compression, and friction from opening-closing cycles, is produced with black flexible co-extrusion (Co-ex) technology featuring high flex memory and wear resistance.Climatic and Thermal Stability (Heat Values):CNR Seal- PVC Series: Operates within standard seasonal temperatures between -20°C and +60°C. A highly economical, long-lasting ceiling solution for standard rolling roof and bioclimatic projects requiring inter-panel insulation.CNR Seal- TPE Series: Demonstrates superior thermal stability under the most extreme climate conditions between -40°C and +80°C. Does not melt, stick, dry out, or loosen between lamel profiles that face direct summer sunlight at vertical angles; in winter, maintains the elasticity of its circular structure under freezing snow load, preventing mechanism jamming.Packaging and Production Length:Standard Wrapping: For this circular balloon cross-section functional bioclimatic inter-panel model, our factory's standard packaging/wrapping quantity is 100 meters.Flexible Solution: To prevent waste based on lamel widths for manufacturers and installation teams, spooling or coil wrapping is performed in custom lengths according to customer requirements and profile dimensions.Customer-Specific (Custom) Flexibilities:Different upper body color options (Assembly root remains red for assembly tracking while body color can be changed) that achieve visual consistency by fully matching the color of aluminum lamel profiles and concept (Anthracite Gray, Black, White, Cream, etc.).Custom cutting capability for your project, eliminating cutting labor at the installation site

View Details
Bioclimatic Panel Seal Strip
CNR-FBP-060305
100 MT

Bioclimatic Panel Seal Strip

Geometric Design and Cross-Section Analysis: Interlocking Nail (Root) Width: 7.5 mm (Locks with full dimensions and high strength into the internal locking grooves of rotating mobile aluminum panel lamellae on their own axis). Total Profile Height: 20 mm (Features optimum damping depth to error-free close the vertical closure distance and working clearance in panel joints). Channel and Geometry Structure: The product features an H-type 7.5 mm dual-nail mounting root (indicated in red color) at the bottom that provides mechanical locking and ease of installation to the profile, and a completely hollow flexible, fully circular smooth balloon (D-type) geometry at the top. It delivers maximum closure and flexibility capability under pressure. Functional Role in the System: Maximum Inter-Panel Pressure and Sealing: Functions along the horizontal line where two panels engage when the mobile aluminum lamellae forming the bioclimatic roof system reach closed position. The 16 mm flexible circular balloon structure creates complete cushioning when panels close, definitively preventing water droplets and moisture transfer that could seep through. Air Cushion Effect and Acoustic Damping: Soft-cushions and definitively prevents metallic noise and wear caused by heavy aluminum lamellae colliding against each other during axial closing movement as if through an air cushion. Dampens micro-vibrations of ceiling panels in strong winds, completely eliminating whistling and humming sounds. Air and Dust Barrier: Creates a complete insulation bridge to preserve interior comfort when the ceiling is fully closed. Keeps air currents, dust, pollen and dirt that could seep into lamel joint areas during severe storms outside. Target Industry and Application Field: Motorized and axially moving bioclimatic aluminum roof system manufacturers, rolling roof producers, premium segment opening-closing winter garden installation companies and architectural aluminum joinery factories. Raw Material and Tolerance Identity: Co-Ex Extrusion Technology: The 7.5 mm lower locking root pressed into the aluminum panel channel is manufactured with rigid PVC/TPE formula (indicated in red color) so it does not separate from the groove during panel movements and vibrations. The 16 mm upper balloon body in black color, which is subject to continuous panel pressure, crushing and friction from opening-closing cycles, is produced with flexible co-extrusion (Co-ex) technology featuring high flexibility memory and wear resistance. Climatic and Thermal Stability (Heat Values): CNR Seal- PVC Series: Operates at standard seasonal temperatures between -20°C and +60°C. A highly economical and long-lasting ceiling solution for standard rolling roof and bioclimatic projects requiring inter-panel insulation. CNR Seal- TPE Series: Demonstrates superior thermal stability in the most extreme climate conditions between -40°C and +80°C. Does not melt, stick, dry or loosen among lamella profile sections that face direct sunlight at vertical angles in summer; retains the flexibility of its circular structure under freezing snow load in winter, preventing mechanism jamming. Packaging and Production Footage: Standard Wrapping: The standard packaging/wrapping quantity established by our factory for this functional bioclimatic inter-panel model with circular balloon cross-section is 100 meters. Flexible Solution: To prevent manufacturers and installation teams from wasting material according to lamella widths, wrapping on reels or bobbins is carried out in desired custom footage according to customer request and profile dimensions. Customer-Specific (Custom) Flexibilities: Different upper body color options (Assembly root remains red for assembly tracking while body color can be changed) that achieve visual unity by perfectly matching the color of aluminum lamella profiles and concept (Anthracite Gray, Black, White, Cream, etc.). Custom length cutting capability for your project, eliminating cutting work at the installation site.

View Details
Bioclimatic Panel Sealing Strip
CNR-FBP-060306
100 MT

Bioclimatic Panel Sealing Strip

Geometric Design and Cross-Section Analysis:Interlocking Claw (Root) Width: 7.5 mm (Locks with full dimensional fit and high strength into the internal locking slots of rotating movable aluminum panel lamellae).Total Profile Height: 16 mm (Possesses optimal damping depth to flawlessly seal the vertical closure distance and working clearance at panel joints).Channel and Geometry Structure: The product features an H-type 7.5 mm dual-claw mounting root (indicated in red color) at the bottom that provides mechanical locking and installation ease to the profile, and at the top a fully hollow flexible, perfectly circular smooth balloon (D-type) geometry. It delivers maximum closure and elasticity under compression.Functional Role in the System:Maximum Pressure and Sealing Between Panels: Functions along the horizontal line where two panels interlock when the movable aluminum lamellae forming the bioclimatic roof system reach the closed position. The 16 mm flexible circular balloon structure creates complete cushioning when panels close, definitively blocking any water particles that could seep and moisture transmission.Air Cushion Effect and Acoustic Damping: Prevents metallic noise and wear caused by heavy aluminum lamellae striking each other during axial closing motion by soft-buffering like an air cushion. Dampens micro-vibrations of ceiling panels in strong winds, completely eliminating rumbling and whistling noises.Air and Dust Barrier: Creates a complete insulation bridge to maintain interior comfort when the ceiling is fully closed. During severe storms, it keeps air currents, dust, pollen, and dirt that could seep into the interior from lamel joint areas out of the space.Target Sector and Application Area:Manufacturers of motorized and axial-motion bioclimatic aluminum roof systems, rolling roof producers, high-end retractable-closable winter garden installation firms, and architectural aluminum carpentry factories.Raw Material and Tolerance Specification:Co-Extrusion Technology: The 7.5 mm lower locking root pressed into the aluminum panel channel is manufactured with a rigid (red color) PVC/TPE formula to prevent it from slipping out of the slot during panel movements and vibrations. The 16 mm upper balloon body in black, which is subject to continuous panel pressure, crushing, and friction from opening and closing movements, is manufactured using high-elasticity memory and wear-resistant black flexible co-extrusion (Co-ex) technology.Climatic and Thermal Stability (Temperature Values):CNR Seal - PVC Series: Operates within standard seasonal temperatures between -20°C and +60°C. A highly economical, long-lasting roof solution for standard rolling roof and bioclimatic projects requiring inter-panel insulation.CNR Seal - TPE Series: Demonstrates superior thermal stability under the most extreme climate conditions between -40°C and +80°C. Does not melt, stick, dry, or become loose among lamel profiles that directly face vertical summer sunlight; maintains the elasticity of its circular structure under harsh winter snow loads, preventing mechanism jamming.Packaging and Production Length:Standard Packaging: The standard packaging/wrapping quantity established by our factory for this functional bioclimatic inter-panel model with circular balloon cross-section is 100 meters.Flexible Solution: To prevent waste by manufacturers and assembly teams based on lamel widths, custom footage rolling or bobbin wrapping is performed according to customer requirements and profile specifications.Customer-Specific (Custom) Flexibility:Alternative upper body color options (Mounting root remains red for installation tracking while body color can be changed) that achieve visual harmony by fully matching the color of aluminum lamel profiles and the concept (Anthracite Gray, Black, White, Cream, etc.).Project-specific length cutting capability that eliminates cutting labor at the installation site.

View Details
Bioclimatic Panel Seal Strip
CNR-FBP-060307
100 MT

Bioclimatic Panel Seal Strip

Geometric Design and Cross-Section Analysis:Interlocking Tooth (Root) Width: 6 mm (Locks with precise tolerance into the internal lock slots and mounting channels of aluminum bioclimatic lamellar profiles).Upper Reservoir Width: 13 mm (Features width that perfectly captures the horizontal isolation line and water collection gap in panel joints).Total Profile Height: 7.6 mm (Provides an optimized micro working height that preserves the system's compact structure and minimizes vertical space requirements).Channel and Geometry Structure: The product features an H-type 6 mm standard mounting root at the bottom that provides mechanical locking to the profile, and a wide flat 13 mm reservoir (U-type open channel) geometry at the top that expands symmetrically to the right and left. This wide flange structure flexes outward under vertical pressure, enhancing surface sealing performance.Functional Role in the System:Inter-Panel Water Drainage Reservoir and Sealing: Functions along the engagement line where two panels interlock when the movable aluminum lamellae of the bioclimatic ceiling system close. The 13 mm wide open reservoir geometry collects water droplets that may seep through joint locations and directs them directly into the main drainage channel.Acoustic Damping and Impact Barrier: Definitively prevents hard metal-to-metal contact between aluminum lamellar surfaces during the axial closing motion. The wide upper body absorbs impact loads generated when panels close and prevents metallic rattling sounds caused by wind.Air and Dust Seal: Creates an effective isolation strip between panels to maintain interior comfort when the ceiling is fully closed. During strong winds, it keeps air drafts, fine dust, pollen, and dirt that might seep through lamellar joints on the outside.Target Sector and Application Area:Motorized and axially-moving bioclimatic aluminum ceiling system manufacturers, rolling roof producers, winter garden installation companies, and architectural aluminum joinery factories.Raw Material and Tolerance Specification:Co-Extrusion Technology: The 6 mm lower interlocking root that passes into the aluminum panel channel features optimal hardness to prevent ejection from the slot during continuous opening and closing vibrations of panels. The 13 mm wide U-type open reservoir body, which is exposed to continuous water contact, panel pressure, and friction, is manufactured using co-extrusion (Co-ex) technology with high wear resistance and flexible "memory" stability that quickly returns to original form after compression.Climatic and Thermal Stability (Temperature Values):CNR Seal- PVC Series: Operates within standard seasonal temperatures between -20°C and +60°C. A highly economical, long-lasting ceiling solution for standard rolling roof and bioclimatic projects requiring interior comfort and basic insulation.CNR Seal- TPE Series: Demonstrates superior thermal stability under the most extreme climate conditions between -40°C and +80°C. Does not melt, stick, dry out, or loosen among ceiling lamellae that face direct sunlight at vertical angles in summer; maintains flexibility under freezing snow loads in winter without impeding panel movement.Packaging and Production Length:Standard Packaging: The standard packaging/wrapping quantity established by our factory for this open-reservoir compact bioclimatic inter-panel model is 100 meters.Flexible Solution: To prevent material waste based on manufacturers' and installation teams' lamellar widths, custom length spooling or coil wrapping is performed according to customer requirements and profile dimensions.Customer-Specific (Custom) Flexibilities:Different color options that achieve visual unity by perfectly matching the color of aluminum lamellar profiles and the concept (Anthracite Gray RAL 7016, Black, White, Cream, etc.).Custom length cutting capability tailored to your project, eliminating cutting work at the installation site.

View Details
Bioclimatic Panel Seal
CNR-FBP-060308
100 MT

Bioclimatic Panel Seal

Geometric Design and Cross-Section Analysis:Locking Tongue (Root) Width: 7 mm (Locks precisely into the internal locking grooves of aluminum bioclimatic panel ceiling slats, providing high mechanical retention).Upper Body Width: 10.60 mm (Has width sufficient to fully cover the horizontal sealing area at panel joint lines with exact tolerance).Total Profile Height: 10.22 mm (Optimized depth conforming to the system's compact operating principle, providing high cushioning in vertical cross-section).Channel and Geometry Structure: The product features a standard H-type 7 mm mounting root at the lower section, a wide right-angled isolation chamber (air gap) at the body center, and sequential micro-ridge (tooth) geometry on the upper pressing surface. This multi-layered structure provides vibration-free closing strength under vertical pressure.Functional Role in the System:Air Cushion Effect and Acoustic Damping: Functions along the horizontal joint line where two panels interlock when the movable aluminum slats of the bioclimatic ceiling system close. The wide rectangular chamber at the body center dampens impact loads generated during the closing movement of heavy panels like an air cushion and completely prevents metallic impact noise.Superior Sealing with Ridged Surface: The micro ridges on the upper surface create a multi-line sealing barrier when pressed against the opposing panel surface. They break the surface tension of water droplets to prevent seepage and acoustically eliminate whistling sounds caused by wind.Air and Dust Seal: Creates an impenetrable insulation barrier to maintain interior comfort when the ceiling is fully closed. In severe storms, it keeps air currents, fine dust, pollen and dirt that could seep through lamel joint areas from entering indoors.Target Sector and Application Area:Manufacturers of motorized and axially-moving bioclimatic aluminum ceiling systems, rolling roof producers, premium retractable-closable winter garden assembly companies and architectural aluminum window and door frame factories.Material and Tolerance Identity:Co-Ex Extrusion Technology: The 7 mm lower locking root passing into the aluminum panel channel is optimally hardened to prevent it from dislodging from the groove under movement vibrations and panel pressures. The chambered body and upper ridged section, which are continuously subjected to vertical compression, pressure and panel friction, are manufactured with flexible co-extrusion (Co-ex) technology featuring high elasticity memory and wear resistance.Climatic and Thermal Stability (Temperature Values):CNR Seal - PVC Series: Operates within standard seasonal temperatures between -20°C and +60°C. A highly economical, long-lasting ceiling solution for standard rolling roof and bioclimatic projects requiring inter-panel insulation.CNR Seal - TPE Series: Demonstrates superior thermal stability in the most extreme climate conditions between -40°C and +80°C. Does not melt, stick or loosen between ceiling slats that directly face summer sun rays at vertical angles; in winter it maintains the elasticity of its chambered structure under freezing snow loads, preventing mechanism jamming.Packaging and Production Length:Standard Packaging: The standard packaging quantity established by our factory for this chambered and ridged functional bioclimatic inter-panel model is 100 meters.Flexible Solution: To prevent material waste by manufacturers and assembly teams according to lamel widths, coil or spool wrapping is provided in custom lengths according to customer requirements and profile dimensions.Custom (Made-to-Order) Flexibilities:Various color options that ensure visual unity by perfectly matching the color of aluminum lamel profiles and the concept (Anthracite Grey RAL 7016, Black, White, Cream, etc.).Project-specific custom length cutting capability that eliminates cutting work on the assembly site.

View Details
Custom Request

Tailored Production and Solutions

Need custom dimensions, color or cross-section on our existing products? Planning a special profile for a different application? Our engineering team designs custom molds and recommends formulations based on your project — send us your request and let's build the right solution together.

Submit Custom Request

Precision Manufacturing

We manufacture to the tolerances demanded by your technical drawings, samples and application requirements — using PVC, TPE, TPV and other technical raw materials at high quality standards.

Turnkey From Design to Mold

From your technical drawing or sample, we plan and manage the entire flow — profile design, mold development, sample approval and serial production — from a single center.

Transparent Production Flow

From the first evaluation of your request through production and shipment, we track every stage on a planned schedule and provide timely updates at each step — delivering reliable project management.